PlayStation 5 Firmware Update 21.02-04.03.00 Is Now Live; Improves System Performance

A new PlayStation five firmware update has gone alive today, introducing system performance improvements.

The 21.02-04.03.00 firmware update, which is around 913 MB large, doesn't seem to introduce much outside of these unspecified system performance improvements.

Update notes: This organisation software update improves organisation performance

The latest major PlayStation 5 firmware update has been released last month, introducing interface improvements, new gaming, and social experience customizations, and support for M.2 SSD storage expansion. Thou.2 drives need to meet minimum performance and size requirements.

Interface: PCIe Gen4 x4 K.2 NVMe SSD

Capacity: 250GB – 4TB

Cooling structure: Using an Thousand.two SSD with your PlayStation v console requires effective heat dissipation with a cooling construction, such as a heatsink. You can attach one to your M.ii SSD yourself, either in a single-sided format, or double-sided format. There are also Chiliad.ii SSDs that have cooling structures (such every bit heatsinks) built in.

Sequential read speed: 5,500MB/s or faster is recommended

Module width: 22mm width (25mm widthis not supported)

Course Cistron: M.2 type 2230, 2242, 2260, 2280 and 22110.
These numbers tin can be constitute on retail listings for K.2 SSD devices. The first two digits refer to the width, the remaining digits to the length.

Socket blazon: Socket 3 (Key K)

Full size including cooling structure:
In millimeters: smaller than 110mm (L) x 25mm (W) 10 11.25mm (H).
In inches: smaller than 4.33in (50) 10 0.984 in (Due west) x 0.442in (H).

See beneath for full requirements.

Length

The following G.2 SSD lengths are uniform with PlayStation v consoles:
30mm, 42mm, 60mm, 80mm, 110mm (respective to the class gene type, per above).

Width
A 22mm-wide M.2 SSD module is required.
The total structure (including an added cooling construction) cannot exceed 25mm (0.984in).

Superlative
The total height of the M.two SSD and its cooling structure (such equally a heatsink) – whether built-in or split up – must exist less than 11.25mm (0.442in).
The height must too be in the correct place, in relation to the M.2 SSD's excursion board:

• The size below the board must be less than 2.45mm (0.096in).
• The total size above the board must be less than 8mm (0.314in).

The PlayStation 5 firmware update 21.02-04-03-00 is now live. It can be downloaded directly from the panel or from the PlayStation official website.

Source: https://wccftech.com/playstation-5-frimware-update-21-02-04-03-00-is-now-live-improves-system-performance/

Posted by: valentinedurstownsee.blogspot.com

Share this post